Type IXC Sketchbook - Volume M

This document was kindly made available by Stosstrupp (M.Hamacher)
who also helped with editing and technical expertise

Click on the thumbnails below to view a full sized diagram and key

The following format will be used for each plate of the sketchbook

First: Translated Key with German text in capital letters followed by the English translation
Second: German Key
Third German Plate (if there is an updated version the old version will be below)

 

  Cover - Sketchbook for the Technical Personnel for U-boat Type IC C/40, Volume M - Ship and Machinery Operation
     
  Regulations
     
  Title Page
     
  Change Page
     
  Table of Contents
     
 

Plate 1: Form of hand wheels, hand cranks and valve identifications

     
 

Plate 2:  Symbols used

     
 

Plate 3: Symbols used

     
  Plate 4: Color identification of pipe lines, conduits, and tubes
     
 

Plate 5: Abbreviations used (on drawings and legends)

     
  Plate 6: Arrangement of compartments and tanks, and tank capacities
     
  Plate 7: Boat plan for leakage control (aft)
     
  Plate 8: Boat plan for leakage control (forward)
     
  Plate 9:  Ballast tank flooding and venting system
     
  Plate 10:  Ballast tank blowing and emergency blowing system
     
  Plate 11:  Exhaust gas blowing system
     
  Plate 12: Flooding- venting- and blowing system for regulating and negative tanks
     
 

Plate 13: High pressure air system

 

     
  Plate 14: Low pressure or service air system
     
  Plate 15: Main drainage system
     
  Plate 16: Auxiliary drain and trimming system
     
  Plate 17: Pumping plan, "Suction"
     
  Plate 18: Pumping plan, "Pressing"
     
  Plate 19: Bow torpedo tube flooding-drainage, venting systems
     
  Plate 20: Stern torpedo tube flooding-drainage, venting systems
     
  Plate 21: Compartment ventilating and oxygen systems
     
  Plate 22: Switching diagrams for the compartment ventilation system
     
  Plate 23:  Fuel oil filling, transfer, and delivery system
     
  Plate 24: Fuel oil venting, sounding and test piping (cross-sections)
     
  Plate 25: Fuel oil compensating system (circulating water under pressure)
     
  Plate 26: Cooling-water system and anti-corrosion oil-circulating system
     
  Plate 27: Engine lubricating oil system, lubricating oil storage, sump and purifying system
     
  Plate 28: Engine lubricating oil system, lubricating oil cooling and circulation system
     
  Plate 29: Lime water (acid neutralizing) system (for battery compartments) / Starting air system
     
    Plate 30:  Unused
     
  Plate 31: Steam heating system
     
  Plate 32: Fresh water generating system
     
  Plate 33: Drinking water, wash water, waste and sanitary systems
     
  Plate 34: Hydraulic system for operating periscopes
     
  Plate 35: Voice tube system
     
  Plate 36: Vibration and noise absorbing mountings - starboard
     
  Plate 37: Vibration and noise absorbing mountings - port
     
  Plate 38: Hoses and their applications